WorldCast Systems Nephtys FM 1+1 IRT
The WorldCast Systems Nephtys FM 1+1 IRT is a redundant FM transmission system.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | N/A |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The General page displays the Transmitter status, Pr‚sence RF, Local Mode, Faute (Fault Status) and Warning status, etc. A Refresh Table button allows you to trigger immediate polling of the previously mentioned parameters. You can also define a Description for the single table entry.
Via a page button, you can view the trap configuration for each of the previously mentioned parameters. Use the Refresh Traps to update these parameters, as they will not be polled otherwise.
Note: A received trap will only trigger a parameter update in case the difference between its event counter and the previous trap event counter is more than the value indicated by the Delta Trap parameter and if Trap Handling is on.