XForm Systems HD Pro 40

The XForm Systems HD Pro 40 is used for HD Up/Down/Framerate conversion, aspect ratio conversion and color correction/legalizing.

About

With this connector, it is possible to monitor and configure XForm Systems HD Pro 40 devices. The different parameters from the device are displayed on multiple pages.

Installation and configuration

Creation

This connector uses a Smart-Serial connection and requires the following input during element creation:

SERIAL CONNECTION:

• IP address/host: The polling IP of the device.
• IP port: The IP port of the device.
• Bus address: Not required.

Usage

General

This page displays the available device information as well as the SNMP, IP and GPIO Settings.

Video Proc Amp

On this page, you can correct various signal parameters.

Video Input

This page displays parameters used to define the Input Source and the Automatic Input Standard Selection. It is also possible to set other setup features.

Video Output

This page contains parameters that can be used to set the System Output.

Video Processing

This page displays parameters regarding:

• Enhancement
• Noise reduction
• Convertion Aperture
• Video Filter and Delay

Zoom and Aspect Ratio

On this page, you can access settings related to:

• Predefined ARC Adjustment
• Active Format Selection
• Manual Zoom, Pan and Scan
• Crop

Cursor

This page displays information regarding Cursor Position and Mode.

Genlock

This page displays parameters used to synchronize various video sources, so that the output of the device is synchronized with the timing reference.

Timecode

The device provides a subsystem to read, generate, insert and display time code information. Those settings are available on this page.

Legalizer

This page displays parameters used to set the RGB Legalizer.

Color Correction

On this page, you can set the RGB Color Correction.

Audio Routing

On this page, you can rearrange the audio channels at output.

Audio Processing

This page displays the status overview of the incoming audio signal.

Audio Delay

This page displays various possibilities to set up the delay of an audio channel.

Presets and Overview

On this page, you can set the presets from the Input, Output and Video as well as the Audio and ANC Processing.