Xicom Technology XTD-2500KL
The XTD-2500KL is a compact antenna-mounted high-power amplifier designed for applications requiring high transmit power levels.
About
The Xicom Technology XTD-2500KL connector is based on the connector XTD-400K from the same vendor. The main difference between these connectors is that the Xicom Technology XTD-2500KL connector uses a single command to retrieve and display the Helix voltage and current for both amplifier tubes. It was also modified to have cleaner code and updated code for readability and usability.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
- Interface connection:
- Baudrate: Baudrate specified in the manual of the device.
- Databits: Databits specified in the manual of the device, by default 8.
- Stopbits: Stopbits specified in the manual of the device, by default 1.
- Parity: Parity specified in the manual of the device, by default No.
- FlowControl: FlowControl specified in the manual of the device.
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
- Bus address: The bus address of the device, by default 65. Range: 255 - 64.
Usage
General
This page displays general information related to the device: the Model, Serial Numbers, Modes, and Firmware.
Amplifier
This page displays information regarding the Output, FWD, and Reverse Power, the Helix Voltage and Currents, and more. You can also set the Constant Power here.
Fault Control
This page allows you to check and set the Power High Trip, Power Low Trip and Reverse Power Trip parameters. There is also a Fault Reset button.
Alarm
This page shows which alarms are currently present on the device.