ZTE ZXR10 2900E Series
This connector is used to collect, parse, and display SNMP data from the Ethernet Switch ZXR10 2928E.
About
Version Info
| Range | Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | V2.05.12B27P08 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created with this connector has the following data pages:
General: Displays the device's system information.
Interface: Displays the Interface and Interface X SNMP tables.
Interface Rates: Allows you to set the rate calculation method for the interface tables (Fast or Accurate) and displays a processed version of the Interfaces table.
IP: Displays the IP Address Table, IP Route Table, and the IP Net to Media Table.
Bridge: Displays the bridge address and ports as well as the STP protocol specifications and priority.
Group Management: Allows you to view and configure certain group management parameters.
This page also has subpages:
Neighbor Discovery: Displays the DP parameters as well as the DP Port and Trunk tables.
Topology: Displays the Topology parameters as well as the Topology Port and Trunk tables.