iDirect iQ200
The iQ 200 Rackmount is part of ST Engineering iDirect's DVB-S2/S2X modem series with a software-defined architecture for maximum flexibility and expansion.
The iDirect iQ200 connector polls all data from the device web interface. The UI of the connector imitates that of the web interface.
About
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | EVOLUTION - 21.0.6.3 90 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
HTTP Connection - Main Connection
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 443).
- Device address: The bus address of the device. If the proxy server has to be bypassed, specify BypassProxy.
Serial Connection - SSH Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 22).
Initialization
On the General > Settings page, fill in the credentials for HTTP and SSH.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
The following data pages are available:
- General: Displays all general data related to device. On the Settings subpage, the HTTP and SSH credentials need to be filled in.
- Satellite: Displays data for the modem state receiver and transmit data.
- Terminal: Contains terminal information, device status information, and geographical information.
- LAN Interfaces: Contains port configuration information and data related to sent and received packages.
- LNB: Contains data for LNB.
- VLAN: Contains a table with all device VLANs.
- Explorer: Allows you to send an SSH command and inspect the response.