Table of Contents

opVision OPV9000 Card

This connector monitors and controls the state of the opVision OPV9000 Card.

About

This connector is automatically generated by the connector opVision OPV9000 range 1.0.0.X.

The protocol is used to control a single opVision OPV9000 Card.

Product Info

Range Supported Firmware Version
1.0.0.x Unknown

Installation and Configuration

Creation

This connector is used by DVEs that are automatically created by the parent element. No user input is required for the element creation.

Usage

This connector has five different pages: Card Overview, Video, Optical, Hardware and Channel Control State.

General Information

On this page, the general information for each card installed in the opVision OPV9000 is displayed in the System Information Table.

This includes:

  • Card Identification
  • Card Address
  • Board Description, Name, and Nickname
  • Frame Description, Name, and Nickname
  • Equipment/Function Type

In addition, you can also perform a factory reset or reboot of the OpVision 9000 card with the buttons in the lower-right corner of the page.

Video

On this page, the following information is displayed in the Video Table:

  • The table row identification, in the Video Index column
  • The card index
  • The channel index associated with the card index
  • The lock input/output
  • The video type for the card/channel combination

Optical

This page displays the following information in the Optical Modules Table:

  • The table row identification, in the Index column
  • The card index
  • The optical module associated with the card index
  • The connection state, in the connected column
  • The link state for the card/module combination

Hardware

On this page, the following information is displayed:

  • The temperature of the cards, in the Temperature Table
  • The power state of the cards, in the Power State Table
  • The fan states of each card, in the Fan Table

The Temperature Table has the following two columns: Card Index and Temperature.

The Power State Table contains the following information:

  • The row identification, in the Power Index column, which combines the card identification and the power unit in use
  • The card identification, in the Card Index
  • The Power Unit identification
  • The Power State

The Fan Table displays the following information:

  • The row identification, in the Fan Index column, which combines the card and its fan identification
  • The card identification, in the Card Index column
  • The Fan Unit identification
  • The Fan State
  • The Work Mode

Channel Control State

This page displays the Channel Control State Table, which displays the card and channel combination state and its medium type.

This table has the following columns:

  • The table row Index, which consists of a combination of card and channel
  • The Card Index
  • The Channel Index
  • The channel's State
  • The channel's medium Type

With the Settings page button, you can configure whether a particular channel for a particular medium type can be opened or closed. To do so, fill in every field and then click Apply.

Improve this page