ITNM Systems IDM100 TSP
This connector is used to retrieve the services from one particular transport stream of the ITNM Systems IDM100 analyzer. The connector uses a serial connection to send HTTP commands to the device.
The connector only polls the services from one of the transport streams of the ITNM Systems IDM100. It is then possible to create a new element for every service retrieved from the device. These elements will in turn use the ITNM Systems IDM100 Service connector.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.1.0.7 | Initial version. | - | - |
| 1.1.1.x | Normalized parameters removed. New display key for Transport Stream PIDs table. | 1.1.0.7 | - Loss of normalized parameters. - Loss of trend and alarm data in the Transport Stream PIDs table. |
| 1.1.2.x [SLC Main] | - Display key implemented in Transport Stream Services table. - Adjustable name for element creation. |
1.1.0.7 | Loss of trend and alarm data in the Transport Stream Services table. |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.1.0.x | No | No | - | ITNM Systems IDM100 Service (generated via button) |
| 1.1.1.x | No | No | - | ITNM Systems IDM100 Service (generated via button) |
| 1.1.2.x | No | No | - | ITNM Systems IDM100 Service (generated via button) |
Configuration
Connections
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Direct connection:
- Baudrate: Baudrate specified in the manual of the device, e.g., 9600.
- Databits: Databits specified in the manual of the device, e.g., 7.
- Stopbits: Stopbits specified in the manual of the device, e.g., 1.
- Parity: Parity specified in the manual of the device, e.g., No.
- FlowControl: FlowControl specified in the manual of the device, e.g., No.
Interface connection:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
- IP port: The port of the connected device, e.g., 81.
- Bus address: The bus address of the device.
Initialization
A bus address is required for the connector to work.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The Services page displays the Transport Stream Services table. This table contains an entry for each service in this particular transport stream.
To create an element for each of these services, click the Create Elements page button. The elements will be created with a name starting with the prefix specified in the Use Prefix parameter.
The new elements will use the ITNM Systems IDM100 Service protocol. As such, it is important that this protocol is available on the DMA.
Notes
Elements using this connector are often created from an element running the ITNM Systems IDM100 General.